TorcUP TX-8
Direct engagement with the nut. For restricted installation spaces and protruding threaded studs.
Series illustration. Version and accessories depend on the model.
Your cassette.
Your torque range.
The effective lever arm differs between cassette groups. Each group therefore has its own pressure-to-torque chart.
Select your across-flats size or cassette group.
| Across-flats range | At 69 bar | At 689 bar | Table range |
|---|---|---|---|
| 49–80 mm | 1.080 Nm | 10.879 Nm | 69–689 bar |
| 81–90 mm | 1.142 Nm | 11.496 Nm | 69–689 bar |
| 91–120 mm | 1.325 Nm | 13.346 Nm | 69–689 bar |
The values are for tool selection. Use the individual calibration chart for the specific tool when setting the pressure. Please enquire about standard across-flats sizes and the required version.
Source: TX operating manual, PDF page 15. Weights and dimensions below are model specifications, not confirmed individual values for each across-flats size.
Technical specifications & clearance.
The dimension names refer to the original drawing in the catalogue. The radius dimension shown there is an edge dimension and must not generally be treated as the external radius measured from the bolt centre. Check the complete installation arrangement, including hose routing.
Source: TorcUP TX catalogue, PDF page 3.
One tool.
A suitable system.
The drive unit and matching hex cassette form a complete tool. The across-flats size determines the cassette group and therefore the torque range.
We match the pump, hose set, reaction support and accessories to your application.
View hydraulic power units ↗Understand the connection.
Choose the right tool.
The torque, across-flats size and a photo of the installation space are enough to get started.
Advice and related equipment
This specialist website is operated by WSD GmbH. Our main website brings together advice, sales, rental and service for this application.